Series Features
All of our enclosures are galvanized, and are available in NEMA types 1, 2, 12, 3, 3R, 4, and X versions. Enclosures come in wall mount, panel mount, or free standing designs with floor mount brackets available on request. Our standard enclosure is a free standing galvanized type 3R, rated for outdoors.
Standard enclosure dimensions are shown in Drawing 1, Drawing 2, and R500f Drawing 3. Custom dimensions are available on request.
Available options for the R500f include powder coating, LED current indicators, and disconnect devices.
Series Comparison: The R500 vs R500f vs R500s
The R500 is our standard packaged capacitor – an enclosed capacitor bank. The R500 is complete with either a terminal block or wire nuts. 100kVAr is our recommended maximum for the R500 series, above 100kVAr we move to R500f. In the R500f series – our fused packaged capacitor – HRC fusing is included in the enclosure with fuses mounted at the customer terminal block, complete with inrush current limiters.
The R500s series is our line of switched packaged capacitors, where fuses and contactors are included in the enclosure at every level of kVAr. The contactors are complete with pre-charge coils to reduce inrush current. Switched capacitors are typically used in applications with soft-starts, or with varying load conditions.
All series include a 5 minute warning label per C.E.C. standards.
NEMA Types
Type 1: Indoor. Protects equipment from falling debris.
Type 2: Indoor. Protects equipment from falling debris and dripping water from sprinkler systems.
Type 12: Indoor. Protects equipment from falling debris, circulating dust, and dripping water from sprinkler systems.
Type 3: Outdoor. Protects equipment from falling debris, windblown dust, rain, and snow. Withstands external formulation of ice.
Type 3R: Outdoor. Protects equipment from falling debris, rain, and snow. Withstands external formulation of ice.
Type 4: Outdoor. Protects equipment from falling debris, windblown dust, rain, snow, and hose directed water. Withstands external formulation of ice.
Capacitor Specifications
| Voltage Ratings | 208 – 999 V |
| Maximum kVAr per 3 phase casing (60 Hz) | 13.6 kVAr @ 208V (rated 20.4 kVAr @ 300V) 25.0 kVAr @ 480V (rated 30.0 kVAr @ 525V) 25.0 kVAr @ 600V (rated 33.0 kVAr @ 690V) 16.7 kVAr @ 600V (rated 45.94 kVAr @ 999V) |
| Specifications | UL and cUL, CSA CAN3-C155-M84 (1986), CSA C22.2 No. 190-M1985, IEC Publication 831-1, 831-2, VDE 560-47, 560-47, EN60831-1, EN60831-2 |
| Insulation | PhMKP Series: non-PCB, natural oil impregnant, flash/ignition points 285/315°C. PhMKP(g) Series: non-PCB, dry/gas agent, available on request (special order). Both series are biodegradable and non-toxic. |
| Electrodes | Vacuum-metallized on one side of the plastic film. |
| Temperature | Ambient: -40°C to +45°C Storage: -40°C to +60°C |
| Inrush Current | Maximum 300 times the rated current. |
| Loading Capacity | 1.10 times the rated voltage. 1.30 times the rated current. 1.50 times the rated output. |
| Frequency Ratings | 50 or 60 Hz |
| Capacitor Casing | Seamless aluminum |
| Losses | ≤ 0.25 Watts per kVAr |
| Discharge Resistors | 50V or less in one minute after disconnection of supply voltage. |
| Dielectric | Polypropylene film |
| Safety Features | Touch-safe terminal. Removeable discharge resistor. Self-healing technology. Grounding/mounting stud at base of capacitor. Over pressure tear-off fuse (pressure sensitive circuit interrupter) internally fused up to 10kAIc. |
| Special Applications | Designed for use in harmonic filters. |
Other items you may be interested in: R500 Packaged Capacitor, R500s Switched Packaged Capacitor
Electrotek ltd. 